Door Industry Journal - Winter 2014

Also online at: www.dijonline.co.uk A GEM OF AN INSTALLATION Warrior doors were commissioned to design, manufacture and install a new high security doorset by Tulja jewellers to replace their existing entrance. The client specifically wanted an interlocking system featuring 2 sliding doors which would be both convenient to use and provide a higher level of security and protection for the premises and staff. Warrior doors chose FAAC’s A140 sliding door operator due to its high performance capability . The doors were heavy because they were manufactured in stainless steel with African cedar hardwood inserts and 19mm ballistic resistant glass plus there was an additional requirement to make the opening wider and higher than standard. The A140 sliding door operator is customizable and modular to meet both architectural and technical needs thanks to the 2 different covers, the exclusive leaf fitting systems and the different leaf profiles that can be used. The operators also offer energy saving capability in conjunction with an energy saving device. “The complexity of the electronic design with two interlocking doors, maglocks to work in conjunction with motorized locks and electronic emergency key override made this a completely new concept.” stated Brett Barratt of Warrior Doors. With the combined expertise of Warriors skilled designers and engineers together with the assistance of the FAAC team it resulted in a very successful installation and a delighted customer. “This new sliding door entrance works extremely well, our customers like the automated security system and the staff have full control from within the store. I think this is one of the most secure automatic retail entrances in the UK”. Mr Lodhia, Proprietor For further information on Warrior Doors visit: www.warriordoors.co.uk 69 THE door industry journal winter 2014 doorsets ASSA ABLOY TESTS HIGH EFFICIENCY THERMAL DOOR Security Doors, a division of ASSA ABLOY UK, the global leader in opening solutions, has tested a new high-efficiency thermal door offering excellent insulation. The thermal door has achieved a U-Value of 1.6 W/m 2 K in both single and double door configurations, exceeding thermal energy efficiency standards referred to in Part L Building Regulations guidelines, which require external pedestrian doors to achieve a U-Value under 2.2 W/m 2 K. The U-Value refers to the amount of heat transferred through a material. A slow transfer of heat leads to a better insulating value, and a lower numbered U-Value. If required, the thermal door can be upgraded to achieve a higher thermal efficiency U-Value of 1.3 W/m 2 K, preventing heat loss further. The thermal technology is concealed in the door’s interior, making it door the same thickness and frame appearance of a standard door, so it is aesthetically appealing for both commercial and residential use. Brian Sofley, Managing Director at ASSA ABLOY Security Doors said: “ASSA ABLOY is well-known for reliable, high performance products, and our new thermal door is no different. Suitable for use in private and commercial properties, occupants can benefit from its high insulating value. “On average up to 20% of heat loss is due to poorly insulated doors and windows. Our advanced thermal technology will contribute to the energy efficiency of buildings as well as saving the bill payer money. “Taking the correct measures to insulate a building, will help to create a comfortable working environment.” The thermal door will be fully CE marked, ensuring validity to be sold throughout the European Economic Area. Covered by a harmonised European products standard or a European Technical Assessment. For further information please visit www.assaabloy.co.uk/securitydoors