Door Industry Journal - Winter 2020

Also online at: www.dijonline.co.uk Automated Gates & Barriers It’s worth noting here that Jack is using Bircher’s new ExpertSystem aluminium. The standard AP-G1 aluminium still works, but there are a few benefits of using the new ExpertSystem version: there is the additional choice of a narrower profile at 30mm (the new aluminium also comes in 36mm and angled versions), it has an internal groove providing a snug fit for the integrated transmitter, and easier fitting of the rubber profile. (figure 6) If you are using the single channel XRF receiver, long press the programming button inside. On a dual channel receiver, long press the new joystick controller. In both cases, you will hear a beep and the LED light will flash orange, at which point, release the button/joystick. (figure 7) Finally, press the safety edge twice to complete the pairing. The LED light on the receiver should be green. Be sure to test the set up by pressing the safety edge, and seeing the LED light on the receiver change from green to red. That’s it! (figure 8) “In this example I’m only using a single channel transmitter, but if I were doing a dual channel set up, the joystick in the receiver makes it so much easier to program,” Jack said. “Left for programming output 1, right for output 2, up for both, and down to clear. Brilliant.” For further details and trade pricing on ExpertSystem (the self-assembly edge, new aluminium, and new wireless system) contact IN2 Access & Control and enquire about a free Trade Account. Email: sales@in2access.co.uk / Tel: 01691 655150